LPG storage tanks is made from welded steel and is designed for the required pressures and heat expansion of the stored hydrocarbon gases, including propane and butane. Storage tanks can be used for domestic heating purposes, for LPG automotive filling and industrial applications
Level Gauges are sensing and measuring instruments that are used to detect the level of a fluid or gas in a tank or similar storage container. These devices are widely used in industrial process applications and are employed to measure the fluid levels in drums, tanks, pressure vessels, or other similar applications.
Level transmitters provide an electrical output proportional to the level of a liquid or bulk solid in a confined space. They may provide an output upon reaching a specified value (point level) or repeatedly after each measurement (continuous level). Level transmitters measure media such as water, fuels, and viscous fluids, or dry media like powders and bulk solids.
Designed primarily for use with LP-Gas and anhydrous ammonia as a main valve on small capacity pumping
systems, NH3 nurse tanks and in-line installations. It may also be installed in the vapor equalizing
opening on bobtail delivery trucks. Installation is quick and easy, and it fits in both full and half
couplings, as well as, in-line applications.
The valve may be actuated manually by hand or cable.
LPG pressure relief valves installed on stationary, portable and transportable containers and piping systems LP-gas relief valves are intended to open only under the excessive pressure conditions. Relief valve designed to automatically reseat firmly after discharge. Most are ASME rated for use with LP-Gas and anhydrous ammonia
These valves are designed for bottom mounting in consumer storage tanks for liquid service. They may also be top mounted for vapor service. These valves are designed especially for use with RegO® globe and angle valves.
A mechanical safety pattern gauge with local indication and an integrated electronic angle-of-rotation sensor for the electronic transmission of pressure values. It is a noncontact sensor and therefore completely free from wear und friction. The pressure transmitter is suited for measuring the relative and absolute pressures of gases, vapors and liquids.
LPG storage tanks is made from welded steel and is designed for the required pressures and heat expansion of the stored hydrocarbon gases, including propane and butane.
Vaporizers are used to raise the temperature of liquefied propane/butane, which alters its phase from liquid to gas. Vaporizers are designed to receive large volumes...
LPG Compressors and pumps typically used for liquid transfer and vapor recovery in applications including storage tanks and Road tankers.
A gas detector measures and indicates the concentration of certain gases in the air via different technologies.
