We are a trusted and leading supplier for fire alarm and fire protection equipment. Our products are of the highest quality to meet the standards and requirements of our clients. We supply, install, and maintain fire alarm and firefighting system in accordance with the national and international standards.
A Fire Alarm System has number of devices working together to detect and warn people through visual and audio appliances when smoke, fire, carbon monoxide or other emergencies are present:
A fire sprinkler system is an active fire protection method, consisting of a water supply system, providing adequate pressure and flowrate to a water distribution piping system, onto which fire sprinklers are connected.
Fire pumps a main part of water based fire protection system and powered by electric or diesel. The pump provides water flow at higher pressure to accommodate the required operation for the fire protection equipment:
Prevents re-ignition by suppressing the formation of flammable vapours, and also adheres to surfaces, providing a degree of exposure protection from adjacent fires. Foam can be used as a fire prevention, control or extinguishing agent for flammable liquid in tanks or processing areas.
Is a special fixed pipe system connected to a reliable source of pressurized water supply and equipped with water spray nozzles for application on area / equipment to be protected. The system can be operated automatically by connection to an automatic detection (pneumatics and electrical) or manually.
LPG pressure relief valves installed on stationary, portable and transportable containers and piping systems LP-gas relief valves are intended to open only under the excessive pressure conditions. Relief valve designed to automatically reseat firmly after discharge. Most are ASME rated for use with LP-Gas and anhydrous ammonia. LPG Shuttoff vales for designed for installation in liquid transfer lines in LP-Gas or Anhydrous ammonia bulk plants to provide for quick shut-off liquid or vapor flow in the event of an accidental pull-away, line break or hose rupture.
Pressure regulators reduce a supply (or inlet) pressure to a lower outlet pressure and work to maintain this outlet pressure despite fluctuations in the inlet pressure and regulators are selected based on stages, also High or low pressure based on system requirement. Regulators are available with (OPSO/UPSO) provision as per requirement. These are mainly used on Domestic, Commercial, Industrial and Agricultural LPG Installations using Bulk Tanks.
The solenoid valves allow the passage of a fluid (liquid or gaseous) through the opening identified by the valve itself. Solenoid valve consists of a solenoid (electromagnet) and the valve body. For the gas industry, these products are specifically made for methane gas and many others to be installed even in contexts at risk of explosion.
Loading and unloading of liquefied petroleum gas LPG and various other media. Optimized for connection and disconnection at higher pressure (up to 25 bar) with a male tank unit and a female hose unit, which have a self-sealing design. With one single action, a straightforward push and a turning motion, the couplings connect for a full flow. A quick and easy, “turn and pull”, action will close the valve and disconnect, with no spillage .Dry Gas Couplings are used to prevent excess spillage, they protect people and property from dangerous ad costly exposure by keeping hazardous liquids and vapors in-line and out of the environment. It is used at liquid or vapor transfer points where you do not want product loss.
