API TANKS The standard API 650 covers the design and calculation of the different elements of the tank. In view of the materials of construction, requirements and recommendations are set forth, i.e. erection sequences, welding procedures, tests and inspections as well as guidelines for operation.
It combines the strength of steel with a three-way protection system: 100% polyurethane dielectric coating, Electrical isolation Factory-installed cathodic protection system using sacrificial anodes UL-58 and UL-1746 compliant Available in single or double-wall Maximum 120° F temperature rating.
A mechanical safety pattern gauge with local indication and an integrated electronic angle-of-rotation sensor for the electronic transmission of pressure values. It is a noncontact sensor and therefore completely free from wear and friction. The pressure transmitter is suited for measuring the relative and absolute pressures of gases, vapors and liquids.
Vaporizers are used to raise the temperature of liquefied propane/butane, which alters its phase from liquid to gas. Vaporizers are designed to receive large volumes of LP liquid and transform it to vaporized gas, at a steady rate and pressure—from hundreds of gallons per hour to thousands of gallons per hour.
LPG Compressors and pumps typically used for liquid transfer and vapor recovery in applications including storage tanks and Road tankers. Applications also includes Road Tanker / Rail Wagon unloading, Mobile Mounted units for Emergency Rescue vehicles for Gas recovery, Cylinder Evacuation and Process Gas boosters.
Gas ball valves offer reliable performance in combustible gas applications and effectively regulate air, gas, and vapor flows. Residential and commercial properties rely on gas ball valves to deliver liquefied petroleum gas (LPG), natural gas, manufactured gas, and gas/air mixtures to gas equipment and appliances.
LPG pressure relief valves installed on stationary, portable and transportable containers and piping systems LP-gas relief valves are intended to open only under the excessive pressure conditions. Relief valve designed to automatically reseat firmly after discharge. Most are ASME rated for use with LP-Gas and anhydrous ammonia. LPG Shuttoff vales for designed for installation in liquid transfer lines in LP-Gas or Anhydrous ammonia bulk plants to provide for quick shut-off liquid or vapor flow in the event of an accidental pull-away, line break or hose rupture.
Pressure regulators reduce a supply (or inlet) pressure to a lower outlet pressure and work to maintain this outlet pressure despite fluctuations in the inlet pressure and regulators are selected based on stages, also High or low pressure based on system requirement. Regulators are available with (OPSO/UPSO) provision as per requirement. These are mainly used on Domestic, Commercial, Industrial and Agricultural LPG Installations using Bulk Tanks.
The solenoid valves allow the passage of a fluid (liquid or gaseous) through the opening identified by the valve itself. Solenoid valve consists of a solenoid (electromagnet) and the valve body. For the gas industry, these products are specifically made for methane gas and many others to be installed even in contexts at risk of explosion.
Loading and unloading of liquefied petroleum gas LPG and various other media. Optimized for connection and disconnection at higher pressure (up to 25 bar) with a male tank unit and a female hose unit, which have a self-sealing design. With one single action, a straightforward push and a turning motion, the couplings connect for a full flow. A quick and easy, “turn and pull”, action will close the valve and disconnect, with no spillage .Dry Gas Couplings are used to prevent excess spillage, they protect people and property from dangerous ad costly exposure by keeping hazardous liquids and vapors in-line and out of the environment. It is used at liquid or vapor transfer points where you do not want product loss.
